ADLINK HPERC-IBR-HH - Manual (Page 20)

10 HPERC-IBR-H Setup
1.12 P2 and P3 Military Connector
The following two tables define the signals and signal maps of the two military I/O connectors
(P2 and P3) on the HPERC-IBR-H. Each table lists the P2 or P3 pin numbers, the signal names
and descriptions and the corresponding pins of the internal IO boards (HIBR and Interface
Board.) Figure 1-6 provides the number and location of each pin on the two military connectors.
Figure 1-6: P2 and P3 Military Interface Connector Pin Locations