ADLINK Express-BE - Manual (Page 66)

Page 66 Express-BE
Feature Options Description
Hard Drive BBS Priorities Info only
CSM16 Parameters Submenu
CSM Parameters Submenu
7.4.2. Boot Configuration > CSM16 Parameters
Feature Options Description
CSM16 Module Version Info only
GateA20 Active Upon Request
Always UPON REQUEST - GA20 can be disabled using BIOS services.
ALWAYS - do not allow disabling GA20; this option is useful when
any RT code is executed above 1MB.
Option ROM Messages Force BIOS
Keep Current
INT19 Trap Response Immediate
Postponed BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE -
execute the trap right away; POSTPONED - execute the trap during
legacy boot.
7.4.3. Boot Configuration > CSM Parameters
Feature Options Description
Launch CSM Enable
Disable This option controls if CSM will be launched.
Boot Option filter UEFI and Legacy
Legacy only
UEFI only This option controls what devices system can to boot.
Launch PXE OpROM policy Do not launch
Legacy only
UEFI only Controls the execution of UEFI and Legacy PXE OpROM.
Launch Storage OpROM policy Do not launch
UEFI only
Legacy only Controls the execution of UEFI and Legacy Storage OpROM.
Launch Video OpROM policy Do not launch
UEFI only
Legacy only Controls the execution of UEFI and legacy video OpROM.
Other PCI device ROM priority UEFI OpROM
Legacy OpROM Determines OpROM execution policy for devices other than network,
storage or video.