ADLINK Express-BE - Manual (Page 57)

Express-BE Page 57
7.3.6. Network
Feature Options Description
Network Info only
Network Stack Enabled
Disabled
Enable/Disable UEFI network stack.
UEFI PXE Driver Enabled
Disabled Enable/Disable UEFI PXE Driver
LAN device enable/disable Enabled
Disabled LAN device enable/disable
7.3.7. PCI and PCIe
Feature Options Description
PCI and PCIe Info only
PCI Common Settings Info only
PCI Latency 32 PCI Bus Clocks
64 PCI Bus Clocks
96 PCI Bus Clocks
128 PCI Bus Clocks
160 PCI Bus Clocks
192 PCI Bus Clocks
224 PCI Bus Clocks
248 PCI Bus Clocks
Value to be programmed into PCI latency timer register.
VGA Palette Snoop Disabled
Enabled Enables or disables VGA palette registers snooping.
PERR# Generation Disabled
Enabled
Enable or Disable the PCI Express port 1 in the chipset.
SERR# Generation Disabled
Enabled Enables or disables PCI Device to generate SERR#.
PCI Express Settings Submenu
PCI Express Gen2 Settings Submenu
NB PCI-E Port Submenu
SB GPP Port Configuration Submenu
7.3.7.1. PCI Express Settings
Feature Options Description
Relaxed Ordering Disabled
Enabled Enables or disables PCI Express device relaxed ordering.
Extended Tag Disabled
Enabled
If Enabled, allows device to use 8-bit tag field as a requester.
No Snoop Disabled
Enabled Enables or disables PCI Express device No Snoop option.
Maximum Payload Auto
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes
4096 Bytes
Set maximum payload of PCI Express device or allow system BIOS
to select the value.