ADLINK Express-BE - Manual (Page 65)

Express-BE Page 65
7.3.12. Thermal
Feature Options Description
Thermal Info only
Critical Trip Point Disabled
85 C
95 C This value controls the temperature of the ACPI Critical Trip Point -
the point at which the OS will shut the system down.
Active Cooling Trip Point Disabled
40 C
50 C
60 C
70 C
BMC Default Active Cooling Trip Point.
Passive Trip Point Disabled
90 C
80 C This value controls the temperature of the ACPI Passive Trip Point -
the point at which the OS will begin throtting the processor.
7.3.13. Miscellaneous
Feature Options Description
Miscellaneous Info only
Trust Computing Submenu
7.3.13.1. Trust Computing
Feature Options Description
Security Device Support Disabled
Enabled Enables or disables BIOS support for security device. O.S. will not
show Security Device. TCG EFI protocol and INT1A interface will not
be available.
Current Status Information Info only
7.4. Boot
7.4.1. Boot Configuration
Feature Options Description
Boot Configuration Info only
Setup Prompt Timeout 1 Number of seconds to wait for setup activation key. 65535 (0xFFFF )
means indefinite waiting.
Bootup NumLock State On
Off Select the keyboard NumLock state.
Quiet Boot Disabled
Enabled Enable or disables Quiet Boot option.
Fast Boot Disabled
Enabled Enables or disables boot with initialization of a minimal set of
devices required to launch active boot option. Has no effect on BBS
boot options.
Boot Option Priorities Info only