ADLINK cPCI-6510 - Manual (Page 73)

Utilities 59
cPCI-6510
7.4 Programming NT Mode EEPROM Map
The cPCI-6510 supports operation in peripheral slot as PCI device
with PCI bus communication with the system board (Universal
Mode). To operate in a peripheral slot in Non-Transparent mode,
the PCIe-to-PCI bridge on the cPCI-6510 should be set to
Non-Transparent mode by programming the NT mode EEPROM
map. The EEPROM map can be downloaded from the cPCI-6510
product page on the ADLINK website:
http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=943
To set the PCIe-to-PCI bridge on the cPCI-6510 to NT mode, per-
form the following steps:
1. Download the EERPOM map cPCI-6510_NT.rar from
the cPCI-6510 product website under Utilities.
2. Prepare a bootable USB flash drive and extract the con-
tents of the folder cPCI-6510_NT into the root directory.
3. Insert the USB flash drive into the cPCI-6510 in system
slot and power up the system.
4. Execute the file NT.bat to program the bridge to
Non-Transparent mode. The board will then operate in a
peripheral slot as a PCI device.
5. To return the cPCI-6510 to Transparent mode, execute
the file TR.bat.