ADLINK cPCI-6510 - Manual (Page 22)

8 Specifications
Table 2-1: cPCI-6510 Specifications
Serial Ports
One 16C550 compatible RJ-45 RS-232 port on front panel
(cPCI-6510V only)
Two serial ports routed to rear I/O
Storage
Interfaces
2.5” SATA HDD direct connector onboard (cPCI-6510V only)
CompactFlash Type II socket onboard
1
BIOS
AMI® EFI BIOS 64Mbit SPI flash memory
IPMI Interface
Supports PICMG® 2.9 secondary system management bus
IPMI functions implemented as defined by IPMI Spec. v1.5;
ATmega128L-8AU Baseboard Management Controller
(BMC) with 128KB programmable in-system flash, 4KB
EEPROM, and 4KB internal SDRAM
Faceplate I/O
cPCI-6510:
2x USB 2.0 ports
2x 10/100/1000BASE-T Ethernet ports
2x PMC and one XMC slots
cPCI-6510V:
3x USB 2.0 ports
2x 10/100/1000BASE-T Ethernet ports
PMC/XMC slot
RJ-45 Serial port
DVI-I port (digital and analog)
Supported OS
Microsoft® Windows® 7 Ultimate
Microsoft® Windows® Vista Enterprise
Microsoft® Windows® XP Professional SP3
Fedora™ 12
Other OS support upon request
Operating
Temperature
2
0°C to 60°C standard
-20°C to +70°C (cPCI-ET6510)
-40°C to +80°C (cPCI-EX6510)
Storage
temperature
-40°C to 85°C
Humidity
20% to 95% non-condensing
Shock
20G peak-to-peak, 11ms duration, non-operating
Vibration
3 Operating: 1.88Grms. 5 to 500Hz, each axis (without HDD)
Compliance
CE EN55022, FCC Class A