Adlink_route_table_dump () – ADLINK aTCA-N700 User Manual
Page 40
![background image](/manuals/733520/40/background.png)
Switch Manager API Programming Guide
40
PARAMETERS
None
RETURN
See the description of status_t in Section 1.
adlink_route_table_dump ()
PROTOTYPE
status_t adlink_route_table_dump (UINT32 ip_last, UINT32 mask_last, int *count,
adlink_route_info_t *route_info);
DESCRIPTION
This function is used to get all route entry info that has been added.
PARAMETERS
ip_last /mask_last [IN] These two parameters pass the last route entry that was retrieved. The
function call will start retrieving route entry info after these values. Set both of
these parameters to 0 the first time this function is called.
Count
[OUT] This parameter passes the number of route entry values retreived. If
"Count" is less than MAX_ROUTE_ENTRY_ONE_TIME_GET, then all the
route entries have been retrieved. Otherwise, we need to call this function
again to continue retrieving route entry info.
route_info
[OUT] This parameter is the pointer for saving the route entry info. It must have
enough space to save as many as MAX_ROUTE_ENTRY_ONE_TIME_GET
route entries.
RETURN
See the description of status_t in Section 1.