ADLINK aTCA-N700 - Manual (Page 29)

Switch Manager API Programming Guide
29
RETURN
See the description of status_t in Section 1.
adlink_trunk_clear ()
PROTOTYPE
status_t adlink_trunk_clear ();
DESCRIPTION
This function is used to destroy all created trunk groups.
PARAMETERS
None
RETURN
See the description of status_t in Section 1.
adlink_trunk_mode_set ()
PROTOTYPE
status_t adlink_trunk_mode_set (int trunk_id, int mode);
DESCRIPTION
This function is used to change trunk group port selection criteria.
PARAMETERS
trunk_id [IN] Trunk group id; Start from ‘1’;
mode [IN] Trunk group PSC mode. PSC_XXX;
RETURN
See the description of status_t in Section 1.
adlink_trunk_info_get ()
PROTOTYPE
status_t adlink_trunk_info_get (int tid, adlink_trunk_db_t *info);
DESCRIPTION