ADLINK aTCA-N700 - Manual (Page 30)

Switch Manager API Programming Guide
30
This function is used to get trunk group information.
PARAMETERS
tid [IN] Trunk group id; Start from ‘1’;
info [OUT] Trunk group information;
RETURN
See the description of status_t in Section 1.
adlink_trunk_monitor_add ()
adlink_trunk_monitor_del ()
adlink_trunk_monitor_get ()
PROTOTYPE
status_t adlink_trunk_monitor_add (int group_index);
status_t adlink_trunk_monitor_del (int group_index);
status_t adlink_trunk_monitor_get (adlink_trunk_monitor_t *tm);
DESCRIPTION
These functions are used to control trunk groups to be monitored or not. For groups in monitor,
member ports with a link failure will be removed from group.
PARAMETERS
group_index [IN] Trunk group id; Start from ‘1’;
tm [OUT] Trunk group status in monitor;
RETURN
See the description of status_t in Section 1.