ADLINK aTCA-N700 - Manual (Page 16)

Switch Manager API Programming Guide
16
adlink_vlan_admin_status_set ()
PROTOTYPE
status_t adlink_vlan_admin_status_set (int vlan, int status);
DESCRIPTION
This function is used to switch admin status of a VLAN. VLAN can be configured but not used.
To use created VLANs, set them ENABLE.
PARAMETERS
vlan [IN] The VLAN ID to be configured;
status [IN] Admin status. Use ‘ENABLE’ or ‘DISABLE’;
RETURN
See the description of status_t in Section 1.
adlink_vlan_create ()
PROTOTYPE
status_t adlink_vlan_create (int vlan, char*name);
DESCRIPTION
This function is used to create a new VLAN.
PARAMETERS
vlan [IN] The VLAN ID to be created;
name [IN] Description for new created VLAN;
RETURN
See the description of status_t in Section 1.
adlink_vlan_destroy ()
PROTOTYPE
status_t adlink_vlan_destroy (int vlan);
DESCRIPTION
This function is used to destroy an existing VLAN.