ADLINK aTCA-N700 - Manual (Page 17)

Switch Manager API Programming Guide
17
PARAMETERS
vlan [IN] The VLAN ID to be destroyed;
RETURN
See the description of status_t in Section 1.
adlink_vlan_member_add ()
adlink_vlan_member_del ()
PROTOTYPE
status_t adlink_vlan_member_add (int vlan, UINT32 port, UINT32 mode);
status_t adlink_vlan_member_del (int vlan, UINT32 port);
DESCRIPTION
These two functions are used to add port into or remove port from a VLAN.
PARAMETERS
vlan [IN] The VLAN ID in which port member is configured.
port [IN] Port ID to be added/removed.
mode [IN] Port is tagged or untagged in the VLAN. Use ‘VLAN_MODE_TAGGED’ or
‘VLAN_MODE_UNTAGGED’
RETURN
See the description of status_t in Section 1.
adlink_port_default_vlan_set ()
PPROTOTYE
status_t adlink_port_default_vlan_set (int vlan, UINT32 port);
DESCRIPTION
This function is used to assign a port’s default VLAN tag for untagged packets.
PARAMETERS
vlan [IN] The default VLAN ID of a port;
port [IN] The port ID which will be assigned a default VLAN tag;
RETURN