ADLINK PXES-2780 - Manual (Page 44)

34 System Management & Configuration
Fan Speed
Auto/Full status of the PXES-2780 is shown here, Auto is dis-
played when the cooling fans are set to auto mode and Full
when the fans are set to run full speed. Selection of Auto or
Full values and clicking Set directly changes cooling fan mode.
Alarm Threshold
Active alarm threshold settings are shown, including DC volt-
age, temperature, and fan speeds. The updated threshold set-
ting can also be set here, by entering the desired value and
clicking Set Threshold Settings.
3.2.3 Chassis Status
Provides operational and threshold settings for the PXES-2780,
including trigger bus, PXIe link, target temperature, and fan mode,
and threshold settings for DC voltage, temperature, and cooling
fan speed.
Trigger Bus
PXI trigger bus routing settings are shown. Between trigger bus
segments - TRIG BUS A (slot 1st to 6th), B (slot 7th to 12th),
and C (slot 13th to 18th), each PXI trigger bus line can be indi-
vidually configured as different routing topologies. Trigger bus
routing settings can be easily saved as templates and loaded
quickly.
PRELIMINARY