2 monitoring the pxes-2780, Monitoring the pxes-2780, Preliminary – ADLINK PXES-2780 User Manual
Page 40
30
System Management & Configuration
To install the monitoring utility:
1. Connect a USB CD-/DVD-ROM drive to the system con-
troller.
2. Place the ADLINK All-in-One CD in the drive.
3. Locate the monitoring utility in the folder
X:\Driver Installation\PXI Platform\PXI chassis\PXES-
2780\xxxx\
(where X: denotes the CD-ROM drive)
4. Double-click the Setup.exe file to begin installation.
3.2 Monitoring the PXES-2780
ADLINK provides a GUI program (PXES-2780 Chassis Remote
Mon. Utility) to monitor the status of the PXES-2780.
As shown, the utility is divided into three interface categories: Con-
nect Control, Remote Status & Control, and Chassis Status.
NOTE:
NOTE:
The PXES-2780 Chassis Remote Monitoring utility is only com-
patible with ADLINK PXI Express controllers such as the PXIe-
3975. 3rd party embedded controllers require dedicate pro-
gramming to enable system monitoring, as listed in the PXES-
2780 Function Library Reference documentation, or use of a
remote PC to monitor the PXES-2780 via RS-232 serial port.
PRELIMINARY