ADLINK cPCI-8554/R - Manual (Page 18)

8 • Getting Started
Inspect the card module carton for obvious damages. Shipping and
handling may cause damage to your module. Be sure there are no
shipping and handling damages on the modules carton before continuing.
After opening the card module carton, extract the system module and
place it only on a grounded anti-static surface with component side up.
Again, inspect the module for damages. Press down on all the socketed
IC's to make sure that they are properly seated. Do this only with the
module placed on a firm flat surface.
Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your cPCI/PCI-8554/R.
2.3 PCB Layout of cPCI/PCI-8554/R
Figure 2: PCB Layout of PCI-8554