ADLINK PXI-2502 - Manual (Page 52)

44
• Operation Theoreym
4.5.2.2 Above-High analog trigger condition
Figure 4.5.3 shows the above-high analog trigger condition, the trigger
signal asserts when the input analog signal is higher than the
High_Threshold voltage. The Low_Threshold setting is not used in this
trigger condition.
Figure 4.5.3 Above-High analog trigger condition
4.5.2.3 Inside-Region analog trigger condition
Figure 4.5.4 shows the inside-region analog trigger condition, the trigger
signal asserts when the input analog signal level falls in the range between
the High_Threshold and the Low_Threshold voltages.
Figure 4.5.4 Inside-Region analog trigger condition