ADLINK PXI-2006 - Manual (Page 21)

Introduction 11
Analog Trigger (A.Trig)
X
Source:
Z
All analog input channels; external analog trigger
(EXTATRIG)
X
Level: ±Full-scale, internal; ±10V external
X Resolution: 8 bits
X Slope: Positive or negative (software selectable)
X Hysteresis: Programmable
X Bandwidth: 400khz
External Analog Trigger Input (EXTATRIG)
X
Input Impedance:
Z 40k
Ω
for DAQ/PXI-2010
Z
2k
Ω
for DAQ/PXI-2005/2006/2016
X
Coupling: DC
X
Protection: Continuous ±35V maximum
Digital Trigger (D.Trig)
X
Compatibility: TTL/CMOS
X Response: Rising or falling edge
X Pulse Width: 10ns min
System Synchronous Interface (SSI)
X
Trigger lines: 7
Stability
X Recommended warm-up time: 15 minutes
X On-board calibration reference:
Z Level: 5.000V
Z
Temperature coefficient: ±2ppm/
°
C
Z
Long-term stability: 6ppm/1000Hr