3xLOGIC VISIX Camera User Manual

Page 60

USER MANUAL | VISIX 360 Network Camera

10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

Edit Record Schedule

c) Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. You

can also check any of the checkboxes before the date and click Copy.

d) Click OK to save the settings and exit the Edit Record Schedule interface.

7) Click Save to save the settings.

Configuring Snapshot Settings

6.2

Purpose:
You can configure the scheduled snapshot and event-‐triggered snapshot. The captured picture can be stored in the
SD card (if supported) or the netHDD (For detailed information about netHDD, please refer to Section 6.1
Configuring NAS Settings). You can also upload the captured pictures to a FTP server.
Basic Settings

Steps:

1) Enter the Snapshot Settings interface:

Configuration > Advanced Configuration > Storage > Snapshot

2) Check the Enable Timing Snapshot checkbox to enable continuous snapshot. Check the Enable Event

triggered Snapshot checkbox to check event-‐triggered snapshot.

3) Select the quality of the snapshot.
4) Set the time interval between two snapshots.
5) Click Save to save the settings.