3xLOGIC VISIX Camera User Manual
Page 50
USER MANUAL | VISIX 360 Network Camera
50
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Set
the
Alarm
Actions
for
Motion
Detection.
Purpose:
You
can
specify
the
linkage
method
when
an
event
occurs.
The
following
contents
are
about
how
to
configure
the
different
types
of
linkage
method.
Linkage Method
Steps:
1) Check the checkbox to select the linkage method. Notify surveillance center, send email, upload to FTP,
trigger channel and trigger alarm output are selectable (Optional).
!
Notify
Surveillance
Center
Send
an
exception
or
alarm
signal
to
remote
management
software
when
an
event
occurs.
!
Send
Email
Send
an
email
with
alarm
information
to
a
user
or
users
when
an
event
occurs.
Note:
To send the Email when an event occurs, you need to refer to Section 5.3.9 to set the related
parameters.
!
Upload
to
FTP
Capture
the
image
when
an
alarm
is
triggered
and
upload
the
picture
to
a
FTP
server.
Note:
Set the FTP address and the remote FTP server first. Refer to Section 5.3.11 for detailed
information.
!
Trigger
Channel
The
video
will
be
recorded
when
the
motion
is
detected.
You
have
to
set
the
recording
schedule
to
realize
this
function.
Please
refer
to
Section
6.2
for
detailed
information.
!
Trigger
Alarm
Output
Trigger
one
or
more
external
alarm
outputs
when
an
event
occurs.
Note:
To trigger an alarm output when an event occurs, please refer to Section 5.6.4 to set the
related
parameters.