3DLABS Wildcat II 5000 User Manual
Page 14
Setup
3Dlabs Graphics Accelerator Card User's Guide
18
5.
If necessary, remove the back panel covers from the slots into which you are installing your
Wildcat II 5000 Graphics Accelerator Card, using a Phillips-head screwdriver.
6.
If an anti-static wrist strap was included in your box, attach it to your wrist and attach the other
end to a bare metal (as opposed to painted or sticker covered) surface on your system’s chassis.
7.
Remove your Wildcat II 5000 Graphics Accelerator Card from its anti-static packaging.