D-Link DFE-580TX - Manual (Page 9)

DFE-580TX Fast Ethernet Server Card Manual
9
When D-Link Server
Card Software is installed,
the title of each Local
Area Connection is
changed to reflect the D-
Link Server Card
Software array name it is
associated with and its
designation as either a
Primary or Secondary
adapter (connection). In
addition, a Virtual
Adapter connection is added for each array that is
created in D-Link Server Card Software.
Step 2
Select the Local Area connection titled "group1 - D-
Link Server Card Virtual Adapter" where group1 is the
name of the array you wish to edit.
Step 3
Right-click and select Properties. The following
window will appear.
Step 4
Select Internet Protocol (TCP/IP) and click the
Properties button.
Step 5
Verify that the correct IP information is listed for the
Virtual Adapter. If needed, edit the IP address
information as you would any other adapter.
Important Note:
As well as the IP Address, the correct values must be entered for Subnet Mask, Default
Gateway, and DNS Server. These values are available from your ISP.