Denso BHT-7500 - Manual (Page 91)

71
Chapter 2. Getting Started the BHT and System Mode
[4.8-1] Setting the TCP/IP
Selecting "1:SET TCP/IP" on the SET TCP/IP menu
calls up the screen shown at left where the current
settings are displayed.
Select a desired item by using the numerical keys
or
and keys, and then press the ENT key.
The entry box of the selected item becomes ready
to accept entry and shows a cursor.
Enter the desired value by using the numerical
keys and then press the ENT key.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
To return to the SET TCP/IP menu, press the C key
when any item is highlighted.
SET ADDRESS
1:IP ADDRESS
[XXX.XXX.XXX.XXX ]
2:SUBNET MASK
[YYY.YYY.YYY.YYY ]
3:DEFAULT GATEWAY
[ZZZ.ZZZ.ZZZ.ZZZ ]