Denso BHT-7500 - Manual (Page 74)

54
[ 4 ] System Environment Setting
Selecting "4: SET SYSTEM" on the SYSTEM MENU
calls up the screen shown at left.
1 EXECUTE PROGRAM : Sets an execution pro-
gram to be run when
the power is turned on.
2 DISPLAY : Sets the message ver-
sion (English or Japa-
nese).
3 DATE/TIME : Sets the calendar clock
(date and time).
4 BARCODE : Sets the special bar-
code scanning param-
eters (the black-and-
white inverted label
reading and the decod-
ing level) and the mini-
mum number of digits
to be read for bar codes
(ITF, STF and Codabar).
5 COMMUNICATION : Sets the communica-
tions environments (in-
terface port and com-
munications param-
eters).
6 KEY : Defines the functions of
the shift key and magic
keys.
7 RESUME : Sets the resume func-
tion.
8 TCP/IP : Sets the TCP/IP and
FTP.
Select a desired item by using the numerical keys
or
and keys, and the selected item be-
comes highlighted. Then press the ENT key.
Press the C key to return to the SYSTEM MENU.
SET SYSTEM
1:EXECUTE PROGRAM
2:DISPLAY
3:DATE/TIME
4:BARCODE
5:COMMUNICATION
6:KEY
7:RESUME
8:TCP/IP
("8:TCP/IP" supported by the
BHT-7500S/7500W only)
(BHT-7500S/7500W only)