Denso BHT-7500 - Manual (Page 60)

40
In addition to the functions given on the previous pages, System Mode has these five
functions: Deleting files, Downloading/uploading the BHT system parameter file, Set-
ting the remote wakeup parameters, Setting the CPU performance and Downloading/
uploading the system message file.
To call up these functions, press the 0 , 3 , 4 , 5 or 6 key, respectively, while
holding down the SF key when the SYSTEM MENU is displayed.
SYSTEM MENU ⇐ Press the PW key while holding down the
SF and 1 keys.
Deleting files
Deletes a program file or data file
stored in the memory.
(Refer to Subsection 2.5.3, [ 9 ].)
Downloading/uploading the BHT
system parameter file
Downloads or uploads the system
parameter file.
(Refer to Subsection 2.5.3, [ 10 ].)
Setting the remote wakeup parameters
Sets the remote wakeup parameters.
(Refer to Subsection 2.5.3, [ 11 ].)
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
7:FTP
8:RF
0 with
SF held
down
3 with
SF held
down
4 with
SF held
down
DELETE FILE
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
SAMPLE05.PD3
SAMPLE06.PD3
SAMPLE07.PD3
SAMPLE08.PD3
SAMPLE09.PD3
SAMPLE10.PD3
SAMPLE11.PD3
SAMPLE12.PD3
SAMPLE13.PD3
SAMPLE14.PD3
SAMPLE15.PD3
SYSTEM PARAMETER
1:DOWNLOAD
2:UPLOAD
SET REMOTE WAKEUP
1:REMOTE WAKEUP
ON OFF
2:TRANSMIT SPEED
9600 19200 38400
57600 115200
("7:FTP" and "8:RF" supported
by the BHT-7500S/7500W only.)