Switching the beeper & vibrator, Adjusting the beeper volume, Adjusting the lcd contrast – Denso BHT-7500 User Manual

Page 45

Chapter 2. Getting Started the BHT and System Mode

Switching the beeper & vibrator

You may choose any of three ways—beeping only, vibrating only, or beeping &
vibrating as a confirmation of completion of bar-code reading.

1) Use the

and

keys to select the BEEPER VIBRATION line that will be

highlighted in any one of the following three states:

Adjusting the beeper volume

You can adjust the beeper volume to four levels from OFF to MAX.

1) Use the

and

keys to select the BEEPER VOLUME line.

2) To turn down the volume, press the

key; to turn it up, press the

key.

Adjusting the LCD contrast

You can adjust the LCD brightness to eight contrast levels.

1) Use the

keys to select the LCD CONTRAST line.

2) To decrease the contrast, press the

key; to increase it, press the

key.

2) Use the

and

keys to highlight the desired way(s).

After making the above setting, press the ENT key or press no keys for five seconds,
and the new setting will be fixed and the above screen will disappear.

This manual is related to the following products:

BHT-7500W BHT-7500S