Important safety instructions – Avanti BD555 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Important Safety Instructions
yWARNINOy
To reduce the risk of fire, electrical shock,
or injury when using your Beer Dispenser,
follow these basic precautions:_____________
Read all instructions before using the refrigerator.
DANGER or WARNING:
Risk of child entrapment.
Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the refrigerator.
Never clean refrigerator parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other refrigerator. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Beer Dispenser
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
Instruction manual
Instruction video
1 Safety Guard Rail
1 Drip Tray (2 Pieces)
1 Cylinder Support
1 C02 Regulator (Box)
1 COa Empty Cylinder (Box)
1 CO
2 Air Line Hose (Red)
2 CO
2 Hose Connectors
1 Beer Keg Coupler (Box)
1 Beer Tower
1 Pull Handle (Beer Tower Faucet)
1 Spanner Faucet Wrench (see illustration on page 10)
6 Plugs (Guard Rail)
1 Beer Keg Stand
1 Metal Plate For Cabinet Bottom
•
Before connecting the Beer Dispenser to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Beer Dispenser
•
This appliance is designed to be free standing only, and should not be recessed or built-in.
•
Place your Beer Dispenser on a floor that is strong enough to support the Beer Dispenser
when it is fully loaded.
•
Allow 3 inches of space between the back and sides of the Beer Dispenser, which allows the
proper air circulation to cool the compressor.
•
Locate the Beer Dispenser away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may Increase
------ electrical consumption. Extreme cold ambient temperatures may also cause the Beer