Directed Electronics AM1 User Manual

Page 25

to learn lock:

1. Open a door.

2. Within 5-seconds:

Press and release the integrated LED/Valet

switch once.

3. Within 5-seconds:

Turn the ignition On and then Off (leave for less than 2-seconds

in the on position).

4. Within 5-seconds:

Press and hold the integrated LED/Valet

switch. The LED will

flash to indicate that the lock routine is ready to be learned.

5. Press lock button:

Press the lock button on the factory transmitter. The LED will illu-

minate for a maximum of 5-seconds to indicate the the lock learn was successful. If
the learn was unsuccessful the LED would continue to flash.

6. Release the integrated LED/Valet

switch.

Now advance to the learn Unlock rou-

tine.

to learn unlock:

1. Within 5-seconds

of the learn lock routine (step 6), press and release the integrat-

ed LED/Valet

switch once.

2. Within 5-seconds:

Press and hold the integrated LED/Valet

switch. The LED will

flash in groups of two flashes to indicate that the unlock routine is ready to be learned.

3. Press unlock button:

Press the unlock button on the factory transmitter. The LED will

illumiate for a maximum of 5-seconds to indicate that the unlock learn was success-
ful. If the learn was unsuccessful the LED would continue to flash in groups of two.

4. Release the integrated LED/Valet

switch.

OTTEE:: If the Unlock learn was unsuccessful, the Unlock procedure can be repeated

by using the LOCK learn procedure, except that at step 2 press and release the inte-
grated LED/Valet® switch TWICE. (The LED will flash in groups of w flashes.)