beautypg.com

Directed Electronics AM1 User Manual

Page 14

background image

12

© 2003 directed electronics, inc.

H1/3 WHITE/BLUE no function.

H1/4 BLACK/WHITE (-) 200 mA domelight-supervision output:

Connect this wire to

the optional domelight supervision relay.

IIM

MPPO

ORRTTA

AN

NTT!! This output is only intended to drive a relay. It cannot be connected

directly to the domelight circuit, as the output cannot support the current draw of one
or more bulbs.

H1/5 GREEN (-) door trigger input

: Most vehicles use negative door trigger circuits.

Connect the green wire to a wire which shows ground when any door is opened. In
vehicles with factory delays on the domelight circuit, there is usually a wire that is
unaffected by the delay circuitry.

LIGHT BULB

PARKING LIGHT

RELAY OR SWITCH

(+) 12V

WHITE H1/2

(-) LIGHT FLASH OUTPUT