Directed Electronics 130XV - Manual (Page 38)

34 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
table of zones
A zone is represented by the number of in-vehicle status LED
flashes used by the system to identify a particular type of input.
Standard input assignments are listed in the following table,
along with spaces to write in any optional sensors or switches
that have been installed.
ZONE
(Number of
DEALER-INSTALLED
LED Flashes)
DESCRIPTION OPTIONS
1
Instant trigger - trunk pinswitch
2
A heavier impact
detected by the shock sensor
3
Door switch trigger
4
For optional sensors
5
Ignition trigger
6
Instant trigger - hood pinswitch
➜
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3-second delay), 1 System armed with
Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with
Tamper Alert
Disarm 5 System disarmed NPC
active