Valet, Take-over, Short-run/turbo – Directed Electronics 130XV User Manual

Page 30

valet

take-over

The Valet

Take-Over feature allows the vehicle to remain

running after the key has been removed from the ignition. This

feature is useful for occasions when you wish to exit and lock the

vehicle for short periods of time, but would like to leave the

motor running and the climate controls on.

To perform Valet

Take-Over:

1. Before turning off the engine, press and release

on the 2-

way remote twice within 3 seconds. Then wait five seconds.

2. Turn the ignition key to the OFF position. (The engine will

stay running.)

3. The engine will run until the pre-programmed time elapses

or a shut-down input is received. (See the previous Remote

Start section for a complete list of shut-down inputs.)

4. The remote start responds with remote start tones and the

Yellow LED illuminates for 3-seconds.

short-run/turbo

Short run turbo mode keeps the engine running after arriving at

your destination for a programmable period of 1, 3, 5 or 10

minutes. This allows the system’s timer to conveniently cool

down the turbo after you have left the vehicle.

➜

note: This feature will not work if the brake pedal is
being pressed.

➜