Remote start – Directed Electronics 130XV User Manual

Page 27

The remote will respond with 3 Orange LED flashes on entering

and 2 beeps and 3 Orange LED flashes on exiting Valet

Mode.

To enter or exit Valet

Mode using the 2-way remote:

1. Open any vehicle door.

2. Press .

3. Press .

4. Press again.

The in-vehicle status LED will light solidly if you are entering

Valet

Mode, and it will go out if you are exiting Valet

Mode.

The remote responds with the normal arm/disarm notifications

with each remote button press.

remote start

This feature allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm

up the engine, as well as adjust the interior temperature of the ve-

hicle with the climate control system. If interior heating or

cooling is desired, the climate controls must be preset, and the

fan blower must be set to the desired level prior to remote starting

the vehicle.

iim

poorrttaan

ntt!! (1) Never remote start your vehicle when the

keys are in the ignition, except when performing Valet

Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.

➜