Directed Electronics 130XV - Manual (Page 29)

25 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
➤ The brake pedal is pressed.
➤ The hood is opened.
➤ The shutdown toggle button is put into the OFF position.
➤ The pre-programmed run time (12, 24, or 60 minutes) has
elapsed.
➤ 2-way remote button is pressed twice again to stop the
vehicle.
➤ The remote responds with remote start off tones and the
Yellow LED flashes 3-times.
note: If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.