Panic mode, Valet, Mode – Directed Electronics 130XV User Manual

Page 26

panic mode

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your 2-way remote. Just

press

for 3-seconds, and you will enter Panic Mode. The

siren will sound and the parking lights will flash for the

programmed siren duration. To stop Panic Mode at any time,

press

on the 2-way remote.

The remote responds with one flash of the Red LED upon

entering Panic Mode and two flashes of the Red LED upon

exiting Panic Mode.

valet

mode

You can prevent your security system from automatically arming

and triggering by using Valet

Mode. This is very useful when

washing the vehicle or having it serviced. In Valet

Mode, the

security system will not arm, even with the 2-way remote, but all

convenience functions (door locks, trunk release, etc.) will

continue to work normally.

To enter or exit Valet

Mode:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

button once within 10 seconds.

The in-vehicle status LED will light solidly if you are entering

Valet

Mode, and it will go out if you are exiting Valet

Mode.

DRW-35

➜