Audiovox CDM 4500 - Manual (Page 7)

BATTERY msiMumom
AHD T^T^fjmGUiG
To Attach the Battery Pack
0 Insert the hook at the end of the Battery Pack Into
the slot at the end of the phone.
0 Press the Battery Pack down to lock the Battery Pack
onto the phone.
To Detach the Battery Pack
® Slfda back the Release Latch as shown below.
® Uft up to remove the Battery Pack from the phone
&ently.
To Recharge Battery
Your CDM‘4500 has a buill-ln tiiarger function. To re­
charge the Battery Pack, always install the Baltery Pack
to the Phone.
1. Attach the Battery Pack to the Phone.
2. Insert the DC plug of the AC Adapter (CMR--1000)
to the Desktop Holder (DTH-4000). Plug the AC
Adapter to AC outlet.
3. Place the Phone with Battery Pack into the Desk­
top Holder.
4/2
4. Then the recharging starts. The display indicates
'now charging" with animaiion. You can sea a
battery level indicator scroll­
ing a1 the upper-right of the
display.
5- For complete recharging, it
is recommended that the phone is turned oft dur-
irtg recharging.
6- When Ihe recharging is completed, the dispiay
indicates “ТиНу charged".
7. it is погппаГ that Battery Pack may become a lltrie
warmer during recharging.
The recharging time, from empty to toil, depends on
Ihe environmentai temrterature, 0 to +35*C-
Battery Type Recharging Timo
Slim LHhium Ion (BTFUigoo) ;.S10 2 h
AC Adapter
Attsrnatiueiy you can recharge ihe Phone using AC
Adapter as fllustraied below.
Not«; Do oot teed the power to the Phone without Bat
isry Pack,