Aiphone NEM-30/C - Manual (Page 3)

NEM-40A/C
2
NAMES & FEATURES
Preset volume controls
Handset
Power switch & LED
TONE volume control
Open voice mic.
RECEIVE volume control
TALK switch
ALL CALL switch &
voice monitor
Station directory
Sub call-in LED
Sub selector button
Preset volume controls
Speaker
Line-connect LED
OFF button
Terminal block
Used for private communication (voice-actuation)
Keep powered status, othenwise calling becomes inoperational
Adjusts sub’s call-in tone in 3 positions
Mic. is on in open voice mode
Adjusts receive volume in 3 positions
Used for open voice communication with NA sub or ail call for max. 10 selected NA subs
Instantly, activates all sub station speakers. Hold down to transmit.
Fill in name by oil-soluble pen
Upon CALL button pushed at sub, LED is steadily lit to indicate, sounding audible tone
In both initiating and receiving a call, depress a button to establish the channel
Preadjusts volumes of all call, transmit, receive & tone.
Call tone rings, and hears sub's voice
Lit during communication
Disconnects a channel of sub, and puts system in standby
Wires all sub station speakers and optional accessories
FEATURES
10 to 40-station call systems
Handset auto voice actuation and/or press-to-taik communication
Tone & LED call-in, staying until master answers
Built-in All Call
Multiple subs call, selectively up to 10 subs
Pre-tone at sub as attention-getter upon selected
Minimized crosstalk, and secured voice volume
Two conductor per sub, home run or multi-conductor cable run
Call extension speaker IER-2
Accessories for health care applications
Music distribution through sub stations. Requires NB-U adaptor, 10W amp. & music source
Call switching device to route any sub call-in to the NEM master station on duty
Sub station can call dual NEM masters simultaneously
3 -