Aiwa XR-M1000 - Manual (Page 24)

CASSETTE DECK
i E I
INSERTING TAPES
Name page
o REJECT (for decki)
o Deck 1
0 Deck 2
O REJECT (for deck 2)
© DOLBY NR 25-29
o REV MODE (DECK 2) 24-26
o SYNC DUB NORM/HIGH 27
o • REC/REC MUTE 26-29
o II PAUSE 25,26
¡◄◄.►►IMS 25
◄ ►PLAY/DIR 25
■ STOP 25-29
The display information of the cassette decks is shown on the
display of the stereo receiver.
REJECT Deck 1 Deck 2 REJECT
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type I (normal), Type II (high/Cr02) or Type IV (metal)
tapes for playback.
Press ± EJECT to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
To play one side only, select Zl.
To play from front side to reverse side once only, select 113.
To play both sides repeatedly, select CZ13.
• When tapes are loaded in both decks, on the display
indicates Continuous Play.
24
ENGLISH