Rting and removing the battery, Cfiarging the battery, Inserting and removing the battery – Audiovox CDM120 User Manual
Page 7: Inserting the battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
rting and Removing the Battery
Inserting the battery
©
Insert the battery into the groove at the
bottom of the phone and then press
the battery in the direction of @ until it
snaps.
•The battery must be correctly placed in the battery
compartment.
•If battery is incorrectly Inserted, the phone will not power |
on or the battery may slip out when in use.
•
ReiTtoving the battery
©
Pull out the battery in the direction @
while pushing the separation tab in
the direction ©.
Cfiarging the Battery
Power connection
Connect the charger to a standard
120V AC outlet.
!
LED's will blink orange when the
power is cinnected.
Charging the battery only
To charge the battery only, insert the
battery pack into the charger.
LED will indicate charging status.
• Red Indicates charging
• Green indicates charging is complete
•Battery is not charged when you purchase the product.
•Fully charge the battery before use.
Charging the battery with the handset
Charging completion
Charging is completed when the
green-colored LED stays on.