Aiphone – Aiphone KB-DAR User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4
WIRING DIAGRAM
Hexagonal wrench
Pull the cover up
and outward.
KB-DAR
Screw cover
Single-gang surface mounting
Calling
Momentarily press CALL button on video door station.
After room station replies, talk hands free in front of camera.
Instant-On audio/video
After chime tone sounds, inside stations see image and hear 
audio of door without lifting handset.
6 OPERATIONS -------------------------------------------------------
TECHNICAL PRECAUTIONS
Caulking seals
Do not apply any caulking seals around
video door station. Water drainage
holes on bottom will help water or 
moisture to dissipate.
Cleaning:
Clean KB-DAR with a soft cloth
dampened with neutral household 
cleaner and cloth. Do not spray 
high-pressure water on video door 
station.
8 SPECIFICATIONS
Power source:
Max. 22V DC (approx.), supplied 
by master station.
Standby 12V DC (approx.).
Current consumption:
Max. 260mA (approx.). 
Standby 5mA (approx.)
Communication:
Simultaneous in open voice.
Picture element:
1/4 inch color CCD.
Night viewing:
Up to 30cm (1') in front of camera.
White LED light projects up to 
30cm (1') away.
Back ground scene over 30cm (1')
can not be seen.
Ambient temperature:
- 10"C ~ 60"C (14"F~ + 104T).
Housing:
Fire-retardant ABS plastic.
Color:
Gray.
Dimensions:
1 0 5 W x 1 4 0 H x 4 4 D ( m m ) .
4-1/8"W
X
5-1/2"H
X
1-3/4"D.
Weight:
300g (0.66 lbs.) approx.
This equipment has been tested and found to eomply with the limits for a Class B digital deviee, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses, and ean radiate radio frequeney energy, and if not installed and used in aecordance with the instruetions, may cause 
harmfiil interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmfiil interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving anteima. • Coimect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. • Increase Ae separation between the equipment and receiver. • Consult the dealer or an experienced 
radio/TV technician for help.
-5-
-5-
■>*-
-Н-
-Н*
-I-
-Í-
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for 
a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it 
become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto 
itself the sole right to make the final decision whether there is a defect in materials and/or workmanship; and whether
or not the product is within the warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in 
violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. 
This warranty does not cover batteries or damage caused by batteries used in connection with the unit.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by 
Aiphone. Aiphone will not be responsible for any costs incurred involving on site service calls.
-Í-
AIPHONE CO., LTD., NAGOYA, JAPAN 
AIPHONE CORPORATION, BELLEVUE, WA, USA 
AIPHONE EUROPE N.V., ANTWERP, BELGIUM
KB-DAR-I(E) 0200A
2
-
©
COMMUNICATION SYSTEMS
AIPHONE
HOME, BUSINESS, INDUSTRY.
Printed in Japan (E)
