Aiphone IBG-1HD User Manual
Chime tone intercom, 0 aiphone
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0 AIPHONE
833356 IBG-lHD-0785'.ß
CHIME TONE INTERCOM
MODEL; IBG-1HD
(room sub station)
* IBG-IHD sub station may be used for Aiphone Chime Tone Intercom Master: IBG-IGD.
* Up to 2 IBG-IHD sub stations can be connected per system.
* Melodic two stroke chime with volume control.
* Includes a button for door release.
* Desk use or wall mounting.
* Power source:
Supplied from IBG-IGD master station.
* Wiring:
Four common wires between master and room station (plus 2 additional wires, if electric door release is
included). Single pair of wires may be extended from any room station to IBR-1 call extension.
* Wiring distance:
Refer to the chart below and select the proper wire gauge to meet your requirements.
0.5 mm
0.65 mm
0.8 mm
Between IBG-IGD
45 m
75 m
115 m
and IBG-IHD
24 AWG
22 AWG
20 AWG
150'
230'
350'
COMPONENTS AVAILABLE FOR USE WITH YOUR CHIME INTERCOM SYSTEM
!
i
IBG-IGD: Master station. Replies to a door
station and also allows calling and
talking with up to two room subs.
IBG-IHD: Room sub station. Replies to a
door station and also allows calling
and talking with master and another
room sub.
EL-9S:
Electric door release.
Requires
separate transformer.
IBR-1:
Chime extension device.
Announces a call from door in a
place remote from master and room
subs.
_
I
1
1 IB-DA:
With plastic cover (surface mount).
•
IB-NA:
With plastic cover (semi-flush mount).
1
IC-RA:
With brown metal cover (semi-flush
mount).
lllllll
IB-JA:
With stainless cover (flush mount).
IB-FY:
With aluminum cover (flush mount).
(Not available in N. America).