AEG MICROMAT 625 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pre-selecting
duration/
finish
Seiect the
mode of
operation
Hours/
minutes
Start
Automatic
start
Note
24
First enter whichever mode of operation you wish (as described
above).
Do
not
press the
button
but the
button
instead. The —H symbol will start
to flash in the display to show the
duration/finish time, and the clock will
start to flash “0:00”.
Now enter the time of day at which the
sequence is to finish. Enter the hour with
the +/-
buttons.
Press the ©
button,
and set the minutes with the +/-
but
tons.
Press the button.
The time of day
will appear in the display, and the —H
symbol of pre-selection of duration/
finish time will light up.
The appliance will switch on automati
cally, and off again at the point in time
you determine (in this example at 12; 15).
The symbol for the operating function
selected, e.g. micro-wave, will light up in
the display. The —H symbol for duration/
finish will also light up. The pre-selected time will now count
downwards in seconds.
If the pre-selection is used for microwave solo operation, it
must
be ensured that food is inside the appliance.