AEG MICROMAT 625 - Manual (Page 23)

In this example, the programmed cook­
ing time (1 minute 15 seconds) first ap­
pears in the display and the display
lights up for Programme No. 1,
Example
p
1
5
M C 1 9 4 ]
After this, the programmed power ap­
pears and the symbol for micro-
wave starts to flash.
Press the ^ button. The dispiay(s) for the operating func-
tion(s) wiii light up, and the time starts to count downwards in sec­
onds.
Start
In this example, the display wili look like Example
this:
At the end of the programme you will hear an audible signal and
the time of day will re-appear in the display.
It is not absolutely essential to display the sequence of the stored Note
programme unless you wish to check which sequence is stored
under a given programme number. You can dispense with dis­
playing the whole sequence by pressing
Programme Button
No. 1,2, or 3 and then the Start button ^ immediately after­
wards.
If you store a new programme under one of the buttons in
which an old programme is already stored you will wipe
out the old programme completely.
The programmes you have entered will also be deleted if
there is a power failure. It is therefore advisable to make a
note of them, so that they are not lost completely.
Note
23