Operation, Caution, Tire pressure – Bolens 135-688-000 User Manual
Page 12: Starting the engine, Note, Stopping the engine, Important, Operating the lawn tractor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION
3.
4.
5.
CAUTION
Keep all shields in place.
Before leaving operator’s position:
a. Shift transmission to neutral
b. Set parking brake
c. Disengage attachment clutch
d. Shut off engine
e. Remove ignition key
Wait for all movement to stop befo
servicing machine.
Keep people and pets a safe distanc
away from machine.
Look to the rear before backing up.
t may
juced
inded
TIRE PRESSURE
For shipping purposes, the tires on your un
be over-inflated. Tire pressure should be re
before unit is put into operation. Recomm
operating tire pressure should be 10 p.s.i.
Check sidewall of tire for manufacturer’s max
imum tire pressure. If this information dotis not
appear on your tire, maximum tire pressure under
any circumstances is 30 p.s.i. Equal tire pr( ssure
should be maintained on all tires.
STARTiNG THE ENGINE
NOTE
To open "the hood, simply lift
up on both sides of the hood on
all models except 668.
1. Service the engine with oil and gasoline as
described in the engine manual.
2. Depress the clutch-brake pedal and set the
parking brake.
3. Place the lift and disengagement lever in the
DISENGAGED_^position. See figure 17.
NOTE
This unit is equipped with a safety
interlock system for your protec
tion. The purpose of the safety inter
lock system is to prevent the engine
from cranking or starting unless the
clutch-brake pedal is depressed
and the lift and disengagement
lever is in the disengaged position.
In addition, the lift and disen
gagement lever must be in the dis
engaged position when the unit is
put into reverse or the engine will
shut off.
Ac
WARNING
\
Do not operate the lawn tractor if
the interlock system is malfunction
ing because it is a safety device,
designed for protection.
4. Set the throttle control in the CHOKE posi
tion. See figure 16.
5. Turn the ignition key to the “START” position.
When the engine is running, let the key return
to the “ON” position. See figure 16.
6. Move the throttle control to desired engine
speed.
STOPPING THE ENGINE
Turn the ignition key to the left to the “OFF” posi
tion. Remove the key to prevent accidental start
ing.
NOTE
A brief break-in period is essential
to ensure maximum engine and
mower life. The break-in consists of
running the engine at half speed for
a period of time required to use one
tank of gasoline. It is also recom
mended to change crankcase oil
after the first 5 hours of operation.
Be sure that the lawn is clear of stones, sticks,
wire, or other objects which could damage lawn
tractor or engine. For best results and to insure
more even grass distribution, do not mow when
lawn is excessively wet.
IMPORTANT
If you strike a foreign object, stop
the engine. Remove wire from spark
plug, thoroughly inspect the unit
for any damage, and repair the dam
age before restarting and operating
the mower.
OPERATING THE LAWN TRACTOR
1. Set the desired cutting height.
2. Start the engine as instructed in previous col
umn.
3. Move throttle control to Va or full throttle to
prevent strain on the engine and to operate
the cutting blades.
4. Place the shift lever in either the “FORWARD”
or “REVERSE” position.
12