Scratch-pad dialing, Scratch pad dialing with keying tones off, Call time display – Audiovox SP85 User Manual

Page 9: To display the talk time of the last call, To display the cumulative talk time, To display the number of calls, To clear the timer, One minute beep (nam option)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Then the long distance number you are calling
will be sent and the DTMF tone will be_________
monitored through the loud speaker. |

Link 3 1

will appear in display.

SCRATCH-PAD DIALING

This feature permits you to enter a number to be
re-dialed (or stored in memory), while engaged in a

conversation.

SCRATCH PAD DIALING

WITH KEYING TONES OFF

This feature permits you to turn off DTMF so the

keypad can be used without annoying tones.

1. Press

FUNC

I, I

then use the keypad.

TONE

I will be displayed for 5 seconds. The

Microphone circuit will remain active, but the
tones will not be heard, or sent when the keys

are pressed.

2. If necessary, press |

STO

|, then enter the

memory address (01 through 50), to store
numbers in memory.

3. To exit the TONE OFF mode, press |

FUNCl

then fOl again, or turn phone off.

CALL TIME DISPLAY

This feature automatically records the elapsed time per
conversation.
The talk time of the last call, cumulative talk time, and
the number of calls can be displayed on the readout.
The timers can also be cleared if necessaiyr With beep
tones you can be notified of the approximate talk
time.(NAM Option)

To Display the Talk Time of the Last Call

1. Press

|RCL|,

key then [T|.

The talk time of the last call will be displayed on the
readout for 5 seconds.
While in a conversation, the talk time of a call in

progress will be displayed, and updated each second.

This display format is as follows.

1m25|

... 1 min and 25 sec

To Display the Cumulative Talk Time

1. Press

iRCLl,

key then

The cumulative talk time willl be displayed on the

readout in minute format for 5 seconds.

I~ 18m I

... 18 min

To Display the Number of Calls

1. Press

IRCLI.

key Q then [^.

The number of calls will be displayed on the readout

for 5 seconds.

The display format is as follows.

I 86cI

... Received or placed 86 calls.

To Clear the Timer

1. Press

CLRI

, then enter the three digit code specially

assigned.

Press

STO

key

then

[T].

The timers will be cleared, and the count for the
cumulative talk time and the number of calls will start
from zero.

One Minute Beep (NAM Option)

During conversation, you can be notified of talk time

roughly by tones for the first five minutes, (every one
minute you can hear a short monotone signal).