Call in absence indicator, Function review – Audiovox SP85 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CALL IN ABSENCE
INDICATOR
This feature indicates to you that a call came in
while you were out of your car.
1
.
Before leaving the car, with the ignition switch on.
Press
IFUNCI,
then [^. The display shows
[Call |.
Turn off the ignition switch, but leave the car
telephone Power Switch ON. If necessary, lock the
unit.
When a call is received, the unit indicates it by
flashing the
[CALL
I display on the readout.
3. This mode is deactivated; but display remembers if a
call has been received.
“ON” or “ACCESSORY”.
2) After 8 hours, or
3) By pressing
IFUNCI,
then fSl again.
4. The flashing |
CALL
| indication will remain in the
display until you manually reset it by pressing any
key in the handset or by lifting the handset.
FUNCTION REVIEW
This feature tells you which numbered keys to use
for different FUNC/RCL key functions.
To review the function menu;
Press
I
func
I
for about one second.
Scroll the menu up or down, using the | # | or
|~*< I key respectively.
The display information will appear as follows.
DISPLAY
(Lock ]
[FUNC 1
]
[Horn ]
[FUNC 2
]
[ C a l l ]
[FUNC 3
]
[HF ]
[FUNC 7 1- ■2]
[ M u t e ]
[FUNC 8
]
[ T o n e ]
[FUNC 9
]
[ABsys]
[FUNC 0 0-
■4]
[T i m e r ]
[RCL X 1-3
]
[RF CH]
[RCL X
4
]
[ L i g h t ]
[RCL X 5
]
[ A l e r t ]
[RCL X 6
]
[Re s t r]
[XYZFUNCa?]
FUNCTION
Lock
Horn
Call in Absence Indicator
Hands-free Adjustment
Mute
DTMF Tone Mute
A/B System Selection
Call Timer
RF Channel Indication
Backlighting Control
Alert Volume Control
Call Restriction
XYZ = security code
20
21