beautypg.com

Aiphone GF-NS User Manual

Aiphone, Gf-ns, Digital name scrolling apartment intercom system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

GF-NS.E MANUAL E TH 0402

®AIPHONE

®

DIGITAL NAME SCROLLING APARTMENT INTERCOM SYSTEM

GF-NS

OPERATION MANUAL

GF-NS

o®@

0®o

GF-10K

PRECAUTIONS

A

WARNING

(Negligence couia result in aeath or serious injury

to people.)

1. This device is electrical. Wiring must be done /C^

by qualified personnel.

2. Do not modify or alter the equipment.
3. Do not open GF-NS/GF-1 OK case.

/?\ CAUTION

(Negligence couia result in injury to people or

Damage to property.)

1. GF-NS/GF-10K are weather resistant. However, do not

spray high pressure water directly onto it by hose, etc.

GENERAL PRECAUTIONS

1. GF system is not operable during a power failure.

2. In areas where broadcasting station antennas are

close by, intercom system may be affected by

radio frequency interference.

Q

General Prohibitions

Prohibitions to subject

the unit to water

Prohibitions to

dismantle the unit

1

NAMES & FUNCTIONS

GF-NS, Name scroll module

1.

LCD display

2.

CANCEL (or decide & back)

3.

A

SCROLL backward or move cursor to left

4.

V

SCROLL forward or move cursor to right

5.

0

CALL (or decide & next)

GF-10K

GF-10K, Digital keypad module

6. Digital keypad (1 ~ 0, ^#)

When entering letters; A ~ Z , 0 = [ , ] [ - ] [ . ] [ / ] [ ]
Functions: • Dialing Room #

• Door release by entering Access code
• Name search with 0key and calling

2

PROGRAMMING

Programming by PC

liggiiiil

5666

GF-NS

-1 I

Cable

I______________ I

(supplied)

PC

• It is possible to write or change resident names from

your PC, making data input.

• Download Programming & Alteration Method from

Aiphone’s Web Site: http://www.aiphone.com/

• Connect your PC with GF-NS in conjunction with the

connecting cable supplied with GF-NS.

Programming by GF-NS & GF-10K

• On LCD display, see a message

"WELCOME"

to confirm system is in standby.

Prior to programming, it is suggested to have

your own ID code newly registered, so that any

other person cannot get into the system.

-►

Go to P.2

Firstly, enter program mode.

In case your programmed ID code is forgotten,

Go to P.4

-

1