Bernina 532-2 - Manual (Page 31)

•uuiudMMdlM
Fir. 3«
Then turn the ball-shaped end clock­
wise until the buttonhole mat k appears
at the top.
Fie. 3t
Now let the end go loose and push it
in the direction of the backward stitch
(direction of the arrow) as far as
possible upwards (Fig. 35),
b
12
Ga
iilj i j . -
5. After the stop c (Fig. 30) has been
brought into the working position by
moving the lever a, take hold of the
lower part 12 a of Ibe knob 12, draw
it to the front end, swiveling it in
such a way that the pawl c comes to
lie against the stop pin I. On the scale
the number 1.5 must stand approxi­
mately opposite the murk b.
13
(lit (!)
Fin. 37
6. Setting the lever 13 (Fig. 37). This
lever is turned so far to the left until
the
w h i t e - m a r k at its upper end lies
opposite the white mark of the sig-zag
lever 12 (Fig. 37). In this way the
machine is set for buttonhole sewing.
50 57