Roll hemmer, Braiding – Bernina 532-2 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Roll Hemmer
The roll hemmer, characterized by two red lines on iU shank, is similar in shape to the
ordinary henuner but is provided with an elongated stitch hole so that zigzag seams
can be sewn. The roll hemmer is operated in the same manner as the ordinary hemmer.
The zigzag control knob 12 (Fig. 2) is set at approx. 3-4. Roll hems are used parti
cularly for edging fine material.
Fii, Z5
Shell Roll Hem
For shell roll hems, use the roll hemmer (2 red
lines). The material with knitted fabric is
inserted in the spiral guide tongue as fur roll
hemming. The zigzag stitch bridges the entire
seam. Tight top thread tension and large stitch
length produce the shell-type effect. This shell
roll hem is used mainly fur edging kuitted
goods.
Braiding
Insert a soft cord in the guide hole of the zigzag embroidering foot, which is marked
by one red line on its shank, and stitch or embroider over with zigzag stitches. Use
mercerized thread BU/2 or GO/2. A variety of effects can be obtained with this type of
stitch.Colon rth read,eolouredcord.anumberofadjacentseamsetc.willenhancetheeffect.
FU. zs
!
diWilali
I
43
4Ь