Bernina 532-2 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F«!' ••wing buttonholas, ttia machlna la ad}u«lad aa followa:
1. Insert buttonhole presser foot.
2 .
Feed-change knob 17 (Fig.2, page 6) must stand at “sewing”.
3. Push lever a (Fig.28 and 29) to the back in the direction
o f
the arrow, in order
that it comes into the position shown in Fig. 80.
In this way the locking catch c (Fig. 30), which determines the width oi stitch for
the bead and for the lock, comes into its working position.
Fie. is
Lever set for
sewing
Fikc. 3d
Lever set for buttonhole sewing
4. The stitch length lever 15 (Fig.28) has two marks on its ball-shaped end, the zig-zag
mark Fig.
3 1
and the buttonhole mark Fig. 32.
Fis, 31
Buttonhole device disengaged
(eig-iug iiiuik)
Fig.
Buttonhole device engaged
(buttunhole mark)
With
thumb
and
forefinger,
the
stitch
length lever 15 (Fig. S3) is pressed as far
as possible towards the machine in the
direction of the arrow.
55
64