Operating the oven – Beko 4710 TBA User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating the oven
Oven heating control knob
This knob is used together with the
"function selection" knob. Select the
desired stage with the "function
selection" knob. Then rotate the "oven
heating control" knob clockwise. The
lamp and the heating elements in
conjuction with the stage you have
selected, or the fan will come on line.
The temperature in the oven shall be
sensed by the thermostat. The
thermostat switches off the heating
element and the thermostat light when
the set temperature level is reached
inside the oven. When the temperature
falls below thermostat comes back on
line and the thermostat light
illuminates. This way, the set
temperature level is maintained
throughout the cooking period.
Function selection knob
This knob allows you to select
functions and carry out checks. The
functions and their stages are
explained below. In order to operate
the stages, you need to bring the
"function selection" knob together
with the "oven heating control" knob
to the desired temperature degree and
adjust the timer if there is. If your
cooker has timer; refer to the
description of timer usage.
Using the oven's timer; If your oven has
a timer; You can do
full automatic, semi automatic and manual
cooking.
You should adjust the electronic timer prior
to using oven.
The electrical current to the heatings
elements flows thought the electronic
timer. The timer must be set in order for
the heating elements to go into operation.
In automatic cooking; do not leave spoilable
foods in the oven up to cooking start time.
* The kinds of food you want to cook.
Thermostat
positions.
Shelf
positions
and recommended cooking times are
given at the cooking table.
* Bring the thermostat knob to the
position you want and function knob
to the " [^" position.
* Preheat the oven for 10 minutes with
oven door closed.
* Locate the meal you want to cook
into the oven after preheating.
* After cooking, bring the knobs to
the "0" position.
The stages of the static oven
function selection knob
Top and bottom heaters
are on.
Bottom heater is on.
□
□
Top heater is on.
□
Means only the grill heater
is on.
You must bring to the
heating control knob to the
maximum temperature.
06