Using the mechanical timer – Beko 4710 TBA User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the mechanical timer
■Minute minder (Yellow) C
Minute hand (Gold) A
-Start of cooking (orange)F
1: To set minute minder (Time of day pull)
2: To set cooking time
(start of cooking pull)
Clock
: Shaft (1) Hands ® & (D
To set the time of day pull and then turn the shaft ® clockwise.
Set the hands ® & d) in the right position of the time of day.
Minute minder:
Shaft 0 Hands (5)
Mechanical bell after a maximum duration of 55 minutes
To set the minute minder turn the shaft ® clockwise and
anticlockwise and put the hand © in front of the selected
duration.
>- At the end of the timing, the bell rings and stops
automatically after aronud 3 minutes. The bell can bastopped
manually by turning the shaft © to put the hand © on the
position STOP .
Cooking Time
: Shaft
®
Disk ©
Immediate start of cooking and automatic stop of
cooking.
Maximum duration: 180 minutes (3 hours).
>■
To set the cooking time, turn the shaft (D clockwise
and put the graduation of the disk (D in front of the ®
index © of the dial.
5^ The end of cooking is indicated by a bell which
stops automatically after 3 minutes. The disk @
indicates "O” (off position). This bell can be stopped
manually by turning the shaft © in order to put the
“0” of the disk in front of the index
Cooking Start Time :
Shaft
@
H a n d ©
Cooking completely automatic with delayed start
and automatic stop of cooking.
Maximum delayed s t a r t ; 12 hours.
X* Before setting the cooking start time, ensure that
the “0" of the disk © is positioned in front of the
index© of the dial.
5^ To set the cooking start time, pull and turn the shaft
©in both directions (clockwise and anticlockwise)
and put the hand © in front of the cooking start time.
When this operation is over set the cooking time as
above mentioned.
16