Beko 4710 TBA - Manual (Page 11)

Operating the oven
Multi-function ovens
Oven heating control knob
This knob is used together with the "function selection" knob.
Select the desired stage with the "function selection" knob.
Then rotate the "oven heating control" knob clockwise. The
lamp and the heating elements in conjuction with the stage
you have selected, or the fan will come on line. The
temperature in the oven shall be sensed by the thermostat.
The thermostat switches off the heating element and the
thermostat light when the set temperature level is reached
inside the oven. When the temperature falls below thermostat
comes back on line and the thermostat light illuminates. This
way, the set temperature level is maintained throughout the
cooking period.
Function selection knob
This knob allows you to select functions and carry out checks.
The functions and their stages are explained below. In order
to operate the stages, you need to bring the "function
selection" knobtogether with the "oven heating control" knob
to the desired temperature degree and adjust the timer if there
is. If your cooker has timer; refer to the description of timer
usage.
*
* The kinds of food you want to cook, Thermostat positions,
Shelf positions and recommended cooking times are given
at the cooking table.
* Bring the knobs to the position you want.
* Preheat the oven for 10 minutes with oven door closed.
* Locate the meal you want to cook into the oven after
preheating.
* After cooking, bring the knobs to the "0” position.
08
The stages of the multi- function oven
function selection knob
%
A
A
A
Fan and oven
lamp are on.
Fan and turbo heater are on.
Fan and bottom heater are on.
Top and bottom heaters are on.
Fan, top and bottom heaters
are on.
Fan and top heater are on.
Means only the grill heater is on.
You must bring to the heating control
knob to the maximum temperature.
6. shelf -
5. shelf -
4.shelf —
3. shelf -
|—2. shelf -
1. shelf